Here is a step by step on how to do channel search for your Direct To Home (DTH) play box.
Step 1
- Using the remote for the play box press "Menu" button. You should have four menu.
- Navigate to "Installation" and press OK.
Step 2
- Under Installation menu scroll to option "Edit TP/Satellite" and press "OK" button.
- Under the Edit TP/Satellite option, you will change the satellite to 124.0E_Ku_JCSat 4B by using the right/left navigational buttons or press "OK" on satellite and select the correct satellite by scrolling down and pressing "OK"
Step 3
- Press the "Audio" or RED colored button to display "Search Settings". Ensure the correct satellite is selected. If not correct change it to the correct satellite 124.0E_Ku_JCSat 4B.
- Change the "LNB Type" by using the right/left navigational keys to 10600. White LNB uses 10700 LNB type and the black uses 10600. Select the correct LNB.
- Then check to see the "Signal" or "Quality" is 50% and is steady.
- Then press "EXIT" and this will bring your back to the Installation Menu.
- Select "Satellite Scan" by pressing the OK.
Step 4
- You will see two satellites displayed. Select satellite 124.0E_Ku_JCSat by pressing "OK" button. Ensure that a green colored tick mark should appear to indicate that the satellite is selected. If both are selected uncheck the other one by pressing OK to deselect it.
- Then Press the "Red" or "Audio" button to initiate channel search. A pop-up search option will appear press "OK" on "SEARCH OPTION ALL" Search progress will be displayed and once search reaches 100%, then search is now complete, and channels will appear.
To find out more, please chat with us by clicking here or send us an email CustomerCarePNG@digicelpacific.com or go to our Digicel PNG official Facebook page by clicking here: DigicelPNG Facebook. Our operating hours are from 8am to 9pm every day.